Trucks and finials
A flag truck built for concealment towers.
The SwingArm Truck is a replacement revolving flag truck for concealment and stealth flagpole cell towers. It swivels with the wind, flips up for maintenance and fits towers 24 to 73 in across. The Adapter Plate mounts it on an existing tower without a rebuild, and the gold Finial Ball finishes it.
Which truck do I need?
Match the spindle thread and the tower diameter
If the tower has WindBands, add 1 in to the diameter. Where two sizes overlap, use the smaller one. Not sure of the thread? Most towers are UNC, and we confirm with you before invoicing or shipping.
| Spindle thread | Tower diameter | SwingArm Truck | Adapter Plate |
|---|---|---|---|
| UNC | 24 to 42 in (61 to 107 cm) | Standard · P/N 110344 · $3,315 | P/N 110445 |
| UNC | 39 to 58 in (99 to 147 cm) | Medium · P/N 110399 · $3,461 | P/N 110590 |
| UNC | 54 to 73 in (137 to 185 cm) | Long · P/N 110419 · $3,615 | P/N 110590 |
| NPT | 24 to 42 in (61 to 107 cm) | Standard · P/N 110050 · $3,309 | Not stocked, contact us |
| Any | Under 24 or over 73 in | Custom solution, contact us | |
Have tower drawings instead? Send them to us and we'll size it for you.
SwingArm Truck
Swivels with the wind. Flips up for service.
From $3,309Standard, Medium and Long · 40 to 43 lbs
Unlike trucks that rust, bind or stay fixed in place, the SwingArm Truck swivels with the wind to take stress off the halyard, and flips upright when crews need to work on towers with cylindrical shrouds.
- Aluminum and stainless, with sealed stainless bearings that won't bind or seize
- Adjustable sliding beam in 1 1/2 in steps fits a range of towers, including bump-outs
- Removable center beam so circular shrouds come off for service
- Works with WindBands and heavy-duty spindles for long reach
Kit includes
Truck body, drip cap, threaded rod and spindle.
| Model | Spindle thread | Length | Height | Weight |
|---|---|---|---|---|
| Standard · 110344 | 1 1/2 in - 6 UNC | 22.25 to 28.25 in | 15.20 in | 40 lbs |
| Medium · 110399 | 2 1/4 in - 6 UNC | 29.75 to 35.25 in | 15.20 in | 42 lbs |
| Long · 110419 | 2 1/4 in - 6 UNC | 37.25 to 43.25 in | 15.20 in | 43 lbs |
| Standard · 110050 | 1 1/2 in NPT | 22.25 to 28.25 in | 15.20 in | 40 lbs |
Adapter Plate
Upgrade an existing tower. No rebuild.
$1,149Recommended with every truck
The Adapter Plate installs over the existing truck boss without removing it. Structural spacers lift it above existing obstructions, and a fastener kit and transfer punch come in the box for accurate drilling that won't damage the powder coat.
Which plate fits which truck
- P/N 110445
- Standard UNC truck (110344)
- P/N 110590
- Medium (110399) and Long (110419) UNC trucks
- NPT trucks
- No stocked plate. NPT towers are uncommon, so contact us for options.
Specifications
- Material
- High-strength A36 steel, powder coated
- Size
- 15 in dia. (38 cm) x 1.5 in H (3.8 cm)
- Weight
- 32 lbs
- Fasteners
- 5/8 in stainless steel
Finial Ball
The finishing touch, built to last.
$1,135P/N 110561 · Fits every SwingArm Truck
Spun aluminum keeps it light and strong, and a gold anodized finish holds its color year after year. Drain holes stop water collecting inside, and the 3/4 in threaded rod mount makes install quick.
- Diameter
- 18 in (45.7 cm)
- Weight
- 12 lbs (5.5 kg)
- Finish
- Mil spec gold anodize
- Mount
- 3/4 in threaded rod, drain holes
Not sure about the spindle thread?
Pick "Not sure" in the Site Kit Builder and we confirm with you before invoicing or shipping.